DIN 1417-4-1970 拉刀.第4部分:矩形端件P(不用于轮毂键槽)
作者:标准资料网 时间:2024-05-13 02:28:43 浏览:9859
来源:标准资料网
【英文标准名称】:Broachingtools;rectangularendpiecesP(notforinternalsplines)
【原文标准名称】:拉刀.第4部分:矩形端件P(不用于轮毂键槽)
【标准号】:DIN1417-4-1970
【标准状态】:现行
【国别】:德国
【发布日期】:1970-08
【实施或试行日期】:
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:机床;拉削工具;尺寸;作标记;刀具柄
【英文主题词】:toolshanks;machinetools;broachingtools;marking;dimensions
【摘要】:
【中国标准分类号】:J41
【国际标准分类号】:25_080_30
【页数】:2P;A4
【正文语种】:德语
基本信息
| 标准名称： | 座式角形压管器 |
| 中标分类： |
机械 >>
工艺装备 >>
组合卡具 |
| 替代情况： | HB 2499-77 |
| 发布日期： | 1989-05-13 |
| 实施日期： | 1989-12-01 |
| 首发日期： | 1900-01-01 |
| 作废日期： | 1900-01-01 |
| 出版日期： | 1900-01-01 |
| 页数： | 2页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 机械 工艺装备 组合卡具
Product Code:SAE J2270
Title:Ship Systems and Equipment--Threaded Fasteners--Inspection, Test, and Installation Requirements
Issuing Committee:Ship Systems - Fasteners Committee
Scope:This SAE Standard covers both quality assurance and installation requirements for fasteners.--This document establishes engineering criteria and guidance for quality assurance requirements (including Test and Inspection) for procurement of threaded fasteners where such criteria and guidance is not otherwise provided by existing fastener standards or specifications. The document also provides requirements and test procedures for self-locking fasteners including those manufactured by the installing activity.--This document also provides requirements for the selection and use of fastener lubricants, additional corrosion protection treatments, fastener tightening procedures, and the use of thread-locking compounds.Field of Application--This document applies specifically to fasteners for ship systems and equipment. This document is intended for commercial and military ships and vehicles, not watercraft for recreational use.
